Flexitallic Facebook pageFlexitallic Twitter feedlinked in page
T: +966 13 802 4242
The Best of Three Worlds
The compressibility of a sheet gasket…..low seating stress
The sealability of a spiral wound gasket…..excellent tightness
The handleability of a solid metal gasket…..doesn’t spring apart like spiral wound gaskets…..no buckling during installation or in service
Custom Shape
Custom shape
Application Engineering
Custom Shape
Site visits around the world
One off designs using proven or developing technology
Experienced Engineers
Flexpro™ Gasket (kammprofile)

Custom Shapes

Flexitallic engineers can carry out a review of your current sealing issue and offer a proven bespoke solution. With over 100 combined years in an engineering environment sealing solutions. All design recommendations are fully checked and documented to provide trouble free running.
Typical Application

Complex solutions involving Finite Analysis to simple re engineered products can be provided.
Style R
Style PN
Serrated core with facings
Custom Shape
Low seating stresses required due to highly conformable facing materials
Robust and has high blow out resistance
A selection of facing and core materials can be specified to suit the application
Profiles available in a variety of forms and to a variety of standards to enhance the sealing performance
Flexpro™ Gasket (kammprofile)

Style PN

The PN type Flexpro™ gaskets are ideal for use in confined locations, including male and female tongue and groove and recessed flange type arrangements.
Typical Application

These gaskets are ideal replacements for jacketed gaskets on heat exchangers as they offer better sealing and seating performance. The Flexpro™ is ideal for bolt compromised and complex applications which are restricted in area, have high system pressure, the Flexpro™ also retains its integrity under severe loads.
style ZA
Style ZA
Serrated core with facing + loose outer ring
Custom Shape
Low seating stresses required
Helps reduce raw material cost
A selection of facing and core materials can be specified to suit the application
Profiles available in a variety of forms and to a variety of standards to enhance the sealing performance
Flexpro™ Gasket (kammprofile)

Style ZA

The ZA type Flexpro™ has a loose fitting outer location ring which is often preferred where flange differential radial thermal expansion may be encountered. These outer rings may also be spot welded.
Typical Application

These gaskets are ideal replacements for jacketed gaskets on heat exchangers as they offer better sealing and seating performance. The Flexpro™ is ideal for bolt compromised and complex applications which are restricted in area, have high system pressure, the Flexpro™ also retains its integrity under severe loads.
Style ZG
Style zg
Serrated core with facing + integral fixed outer ring
ZG
Low seating stresses required
Robust and has high blow out resistance
A selection of facing and core materials can be specified to suit the application
Profiles available in a variety of forms and to a variety of standards to enhance the sealing performance
Flexpro™ Gasket (kammprofile)

Style ZG

The ZG type Flexpro™ utilizes an integral outer locating ring for correct gasket positioning within the mating flange bolt circle. Style ZG Flexpro™ gaskets are recommended for used on standard raised face and flat faced flanges.

Typical Application

These gaskets are ideal replacements for jacketed gaskets on heat exchangers as they offer better sealing and seating performance. The Flexpro™ is ideal for bolt compromised and complex applications which are restricted in area, have high system pressure, the Flexpro™ also retains its integrity under severe loads.
About Flexitallic banner pic
Flexpro™ Kammprofiles